FDU Hotrunner GmbH 

FDU - FLAT DIE UNIT

THE FUTURE OF INJECTION MOULDING

The „Flat Die Unit“ was originally a development synergy project of HAIDLMAIR GROUP companies under the leadership of the HAIDLMAIR Research & Development department. It combines the benefits of the injection moulding and extrusion technology. The FDU has now reached series maturity and is now being further developed and distributed by the newly founded company FDU Hotrunner GmbH. The specialists of the FDU Hotrunner GmbH are at your disposal.

The FDU is a newly developed open hot-runner nozzle system for injection
moulds. The flow channel in the nozzle has been projected onto a flat nozzle.
The plastic flows evenly into the cavity through a defined narrow gap instead of
a small pin gate.


The FDU is particulary suitable for the use of polyolefins.

 

 News 

From 21 to 24 May we were represented at the Molding Expo in Stuttgart. At the joint stand of the VDWF, a Haidlmair tool powered by FDU technology was shown in operation. At our booth there was a lot of interest in the technology.

FDU at the
Moulding Expo

In autumn, we will be represented at the plastics trade fair K in Dusseldorf. The fair takes place this time from 16. - 23. October 2019.

We are working together with our parent company HAIDLMAIR GmbH on
booth  E49-6 in hall 12.

On the exhibition stands of HAIDLMAIR, Erema and Woojin you can see tools with FDU technology in operation.

FDU at the
K2019

 

 FDU Advantages 

FDU - FLAT DIE UNIT

FOR HIGHER PRODUCTIVITY

Finalised projects show that we achieved significant reductions of cycle time
and injection pressures.


Benefit from the advantages of the FDU and the resulting higher productivity and
use the future of injection moulding already right now!

  • Reduction of injection time

  • Reduction of injection pressure

  • Optimum effect of holding pressure

  • Shorter cooling times

  • Reduction of shear 

  • Improvement of part quality

  • Use of new materials

  • other or more favourable properties

 

 FDU Nozzle Types 

FDU MINI

Sword-Width: 6 mm 

FDU MIDI

Sword-Width: 25 mm 

FDU MAXI

Sword-Width: 44 mm 

 

    Contact    

Dipl.Ing.(FH) Andreas Kißler

Chief Executive Officer

Phone.: +49 6233 51195-11

E-Mail: andreas.kissler@fdu-hotrunner.com

 Dipl.Ing.(FH) Oliver Achauer
Sales Manager

Phone: +49 6233 51195-40  
E-Mail: oliver.achauer@fdu-hotrunner.com

Dipl.Ing.(BA) Christian Zimmer

Head of Application Engineering | 
Key Account Manager

Phone: +49 6233 51195-20

E-Mail: christian.zimmer@fdu-hotrunner.com

B.Eng. Janis Magin

Head of Engineering | Key Account Manager

Phone: +49 6233 51195-30  
E-Mail: janis.magin@fdu-hotrunner.com

FDU Hotrunner GmbH
Mühlbergstraße 9
D-67227 Frankenthal

phone: +49 6233 51195-10
fax: +49 6233 51195-99

office@fdu-hotrunner.com

© FDU Hotrunner GmbH